Honeycomb Ceramic Carrier Diesel Particulate Filter for Exhaust Purification

• Customization: Available
• After-sales Service: 3years
• Warranty: 3years
• Model NO.: SF-HCS
• Type: Catalytic Converter
• Body Material: Steel
• Discharge Standard: Euro III
• Noise Source: The Noise of Engine
• The Noise of Engine: Aerodynamic Noise
• Automobile Chassis Noise: Transmission Noise
• Component: Catalytic Converter
• Main Market: North America
• Product Name: Catalytic Converter of Cordierite Honeycomb Cerami
• Hole Density: 400cpsi
• Size: Dia 144*152 mm
• Cordierite Crystal Phase: >90/95
• Soften Temperature: >1360/1390
• Porosity: 40-45
• Application1: The Backpressure Is Small, The Hole-Wall Is Thin
• Application2: Has Good Mechanical Strength
• Application3: The Coefficient of Thermal Expansion Is Small
• Appliation4: The Cold Start Performance Is Good
• Package: on-Demand Customization
• Transport Package: Cartons with Pallet
• Specification: 1.1*1.1*0.12
• Trademark: SEFU
• Origin: China
• HS Code: 6909190000
• Production Capacity: 100000pieces /Per Year
• Package Size: 55.00cm * 37.00cm * 28.00cm
• Package Gross Weight: 1.500kg

Product Description

Cangzhou Sefu Ceramic New Materials Co., Ltd.

Add: Guanting Industrial Park, Cangzhou City, Hebei, China

 

Product Description

Catalytic Converter Of cordierite Honeycomb ceramic Particulate Filter

Description :
DPF is a special honeycomb ceramic filter with wall flow structure. It uses microscopic pores in its inner wall to remove particulate matter from diesel engine exhaust. There are many micropores on its inner wall. These micropores allow gases to pass through the walls but reject most particulate matter in the exhaust. When exhaust gas from a diesel engine enters one DPF channel from the open end, since the other end is closed, the exhaust gas is forced to pass through the micropores in the inner wall and be discharged from the adjacent open channel. During this process, those particles larger than these pore sizes are trapped on the inner wall, thus achieving the filtering effect.

As one of the leading technologies to meet current PM emission standards, a diesel particulate filter (DPF)has been developed for the exhaust after-treatment. Most of the commercially available DPFS are ceramic honeycomb filters. However, due to the limitation of the DPF volume, whose porosity is about 0.4, the filter would be plugged with particles, which causes an increase in the filter backpressure [6,8,9]. If the backpressure is too high, the engine may stall or the fuel consumption rate may increase.  An establishment of a new PM treatment technology without recourse to the catalyst is urgently required. Thus, it is important to develop a non-catalytic exhaust after treatment. There is an alternative, the silicon carbide (SiC) ceramic foam filter.

Installation Method:
The product is installed in the exhaust system of a diesel engine and uses a wall-flow method to filter particulate five (PM) with a removal efficiency of up to 98%. It is an effective means to control the black smoke of exhaust gas and can also greatly reduce noise pollution. We can produce various types of traps with a hole density of 100 mesh and 200 mesh. The product can meet the emission standards of EURO v, EURO vi, EPA, etc., and can be widely used in diesel vehicles and general machinery.

Features :
1. The black smoke treatment and deodorization effect is obvious, and the opacity is close to zero
2. The filter element used in the system has a long service life
3. The purification system is automatically started, controlled, and easy to operate
4. Intelligent regeneration control system to reduce energy consumption
5. The structure is sturdy, and the shell package is not modified
6. Assembled structure, easy to install.

Specification size

ITEM	Size	Hole density
DPF 01	Dia 143.8*152.4mm	200
DPF 02	Dia 143.8*254mm	200
DPF 03	Dia 170*152.4mm	200
DPF 04	Dia 170*203mm	200
DPF 05	Dia 170*254mm	200
DPF 06	Dia 170*305mm	200
DPF 07	Dia 190.5*152.4mm	200
DPF 08	Dia 190.5*254mm	200
DPF 09	Dia 190.5*305mm	200
DPF 10	Dia 240*152.4mm	200
DPF 11	Dia 240*254mm	200
DPF 12	Dia 240*305mm	200

 

SEFU Honeycomb Ceramic Carrier Diesel Particulate Filter for Exhaust Purification

Detailed Photos

Product Parameter:

No.	Section Shape	Specification	holes / square inch	No.	Section Shape	Specification	holes / square inch
1	cylinder	Ø143.8*152.4	200	12	cylinder	Ø240*240	200
2	cylinder	Ø143.8*254	200	13	cylinder	Ø240*254	200
3	cylinder	Ø170*203	200	14	cylinder	Ø267*203	200
4	cylinder	Ø170*254	200	15	cylinder	Ø267*254	200
5	cylinder	Ø170*305	200	16	cylinder	Ø267*305	200
6	cylinder	Ø190.5*152.4	200	17	cylinder	Ø286*203	200
7	cylinder	Ø190.5*203	200	18	cylinder	Ø286*254	200
8	cylinder	Ø190.5*254	200	19	cylinder	Ø286*305	200
9	cylinder	Ø190.5*305	200	20	cylinder	Ø305*305	200
10	cylinder	Ø240*152.4	200	21	cylinder	Ø330*254	200
11	cylinder	Ø240*203	200	22	cylinder	Ø330*305	200

FAQ

Q: Are you Factory?
A: Definitely, we are a factory.  Welcome to visit us!

Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms. 

Q: How can you control your quality? 
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.

Q: What is your lead time? 
It usually needs about 15- 20 days after receiving the PO.

Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.

Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.

Q: How can I get samples?
A: We are honored to offer you the samples.

Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.

Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.

Q: Does your company accept customization?
A: We accept OEM service.

Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit our company.