Cangzhou Sefu Ceramic New Materials Co., Ltd.
Add: Guanting Industrial Park, Cangzhou City, Hubei, China
Product Description
EXOTHERMIC riser sleeves for cast iron and steel castings
Description:
Heat insulation riser sleeves is through the use of heat preservation material to reduce the heat loss of the molten metal in the riser, a long time to keep metal liquid in the liquid state and achieve an effective supplement of castings.
Through the chemical reaction of the heating material to generate heat, so as to raise the temperature of the metal liquid in the riser, prolong the time of solidification of the molten metal in the riser;
Effectiveness:
- Effectively solves casting shrinkage porosity, shrinkage cavity, and other defects.
- Significantly lower casting slag, porosity, and other defects.
- Effectively improve the casting rate of final products and economic benefit.
- Reducing the workload of riser cleaning and welding repair.
Application:
Insulating risers and exothermic risers can be widely used in large, super, and medium-sized production for cast steel, cast iron, and alloy casting.
User guide:
Pay attention to the following for the riser sleeve selection and application.
- After calculating the feeding casting modulus, select the corresponding type of riser sleeve, and make the effective modulus greater than the casting modulus.
- The riser usage can be used in embedded and inlaid methods. With the embedded method, the special riser mode must be installed on board.
- The blind riser top should be set with a vent hole to ensure the connection of the atmosphere.
Note:
- Riser sets should be stored in a cool dry place to prevent moisture absorption.
- Away from open flame.
- Pay attention to handling with care when package, handling, and transporting so as to prevent extrusion collision.
Packing :
Various riser sets must be thermal shrinkage sealed by plastic film, and then strictly packaged by carton or as to the user's requirements.
Technical Data
| Items |
Indicators |
| Tolerance (%) |
±5 |
| Density (g/ml) |
0.7-1.0 |
| Moisture (%) |
≤0.5 |
| Permeability (AFS) |
≥70 |
| Compressive Strength (Mpa) |
3.82-6.62 |
| Ignition time (s) |
8--25 |
| Combustion time (s) |
50--150 |
| Heating Temperature (°C) |
≥1450 |
| SEFU CHINA Heat Insulation Foundry Exothermic Feeder Riser Sleeves for Iron and Steel Castings |
Detailed Photos
FAQ
Q: Are you Factory?
A: Definitely, we are a factory. Welcome to visit us!
Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms.
Q: How can you control your quality?
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.
Q: What is your lead time?
It usually needs about 15- 20 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.
Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honored to offer you the samples.
Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.
Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.
Q: Does your company accept customization?
A: We accept OEM service.
Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit our company.
){kind=link}