Sic Ceramic Cordierite DPF Filter Silicon Carbide Catalyst Substrate for Diesel Exhaust

• Application: Ceramic Decorations, Refractory, Structure Ceramic, Industrial Ceramic
• Material: Cordierite
• Type: Ceramic Parts
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SF-DPF
• Product Name: Diesel Particulate Filter
• Color: Grey, White (General)
• Engine Type: Gas/Diesel
• Shape: Cylinder
• Transport Package: Cartons with Pallet
• Specification: 1.1*1.1*0.12
• Trademark: SEFU
• Origin: China
• HS Code: 6909110000
• Production Capacity: 20000pieces/Month
• Package Size: 55.00cm * 37.50cm * 28.00cm
• Package Gross Weight: 1.500kg

Product Description

Cangzhou Sefu Ceramic New Materials Co., Ltd.

Add: Guanting Industrial Park, Cangzhou City, Hubei, China

 

Product Description

Diesel Particulate Filter

The pollution emitted by diesel cars, such as heavy-duty trucks, causes environmental problems.

Fine nanoparticles, including soot, known as particulate matter(PM), can penetrate deep into our lungs and pose serious health risks, including aggravated asthma, lung damage, and human carcinogenic effects. Hence in many countries, stricter exhaust emission standards, such as Euro V, are being set, and a diesel exhaust after-treatment is needed.

As one of the leading technologies to meet current PM emission standards, a diesel particulate filter (DPF)has been developed for the exhaust after-treatment. Most of the commercially available DPFS are ceramic honeycomb filters. However, due to the limitation of the DPF volume, whose porosity is about 0.4, the filter would be plugged with particles, which causes an increase in the filter backpressure [6,8,9]. If the backpressure is too high, the engine may stall or the fuel consumption rate may increase.  An establishment of a new PM treatment technology without recourse to the catalyst is urgently required. Thus, it is important to develop a non-catalytic exhaust after treatment. There is an alternative, the silicon carbide (SiC) ceramic foam filter.

The silicon carbide foam ceramic filter material has a 3D 2 cross-linked reticular structure. It is the best choice as a catalytic carrier to reduce HC and CO pollutants in diesel exhaust. And has good performance and an electric heating effect. The results show that the silicon carbide foam ceramic has good electrical conductivity and excellent thermal shock resistance, so it is suitable for use as an electric heating catalyst carrier to increase the exhaust temperature, thereby improving the conversion efficiency of HC and CO in diesel at low temperatures.

Feature
Taking advantage of high thermal conductivity, high strength, and high heat resistance, as well as segmented assembling method, the filter designs are made to withstand high thermal stresses and to be flexible for any shapes.
In addition, our SiC-DPF has a uniform pore structure because of well-controlled raw materials and the sintering process. This allows to trap PM in a consistent manner, thus enabling stable regeneration (incineration of PM).

1. Filtration efficiency of more than 99%
Our sintering process employs re-crystallization of SiC particles at a high temperature. Pores of micron meter order are uniformly formed to allow exhaust gas to pass through, facilitating an efficient capturing of PM.
High thermal conductivity
2. Silicon carbide (SiC) has one of the highest thermal conduction rates among ceramic materials.
When used as a main component of a DPF substrate, it burns (recycles) trapped soot efficiently, contributing to low fuel consumption.
3. High strength
SiC has the same crystal structure and comparable hardness to diamonds. This lends itself to high-durability, high-reliability applications.
4. High heat resistance
SiC, with a sublimation point at 2000ºC or higher, retains its characteristics without melting or becoming deformed under any thermal environment encountered in internal combustion engines.
5. High chemical stability
SiC is also chemically stable and is hardly soluble even in strong acids such as sulfuric acid.
However, reactions may occur under special conditions.
6. High shock resistance
We have reduced fracture stress generated by temperature differences inside DPFs by employing a segmented structure, allowing retention of the DPF shape under any operating condition.

Working principle for removing SPM
Install the SIC-DPF between the engine and the muffler to remove suspended particulate matter (SPM) in the exhaust gas of the diesel engine.  
DPF features a honeycomb structure where adjacent gas channels are alternately closed.Because ends are alternately closed on exhaust inlet and outlet ends, exhaust gas is forced to go through filter walls made of SiC, and exiting as a clean gas.

Product Parameters

 

Component	Unit	Data	Component	Unit	Data
SiO2	wt%	48-51	Fe2O3	wt%	<0.5
Al2O3	wt%	31-34	Na2O	wt%	<0.5
MgO	wt%	14-16	K2O	wt%	<0.5

 

SEFU CHINA DIESEL PARTICULATE FILTER SUPPLY Sic Ceramic Cordierite DPF Filter Silicon Carbide Catalyst Substrate for Diesel Exhaust

Detailed Photos

Product Parameter:

No.	Section Shape	Specification	holes / square inch	No.	Section Shape	Specification	holes / square inch
1	cylinder	Ø143.8*152.4	200	12	cylinder	Ø240*240	200
2	cylinder	Ø143.8*254	200	13	cylinder	Ø240*254	200
3	cylinder	Ø170*203	200	14	cylinder	Ø267*203	200
4	cylinder	Ø170*254	200	15	cylinder	Ø267*254	200
5	cylinder	Ø170*305	200	16	cylinder	Ø267*305	200
6	cylinder	Ø190.5*152.4	200	17	cylinder	Ø286*203	200
7	cylinder	Ø190.5*203	200	18	cylinder	Ø286*254	200
8	cylinder	Ø190.5*254	200	19	cylinder	Ø286*305	200
9	cylinder	Ø190.5*305	200	20	cylinder	Ø305*305	200
10	cylinder	Ø240*152.4	200	21	cylinder	Ø330*254	200
11	cylinder	Ø240*203	200	22	cylinder	Ø330*305	200

FAQ

Q: Are you Factory?
A: Definitely, we are a factory.  Welcome to visit us!

Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms. 

Q: How can you control your quality? 
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.

Q: What is your lead time? 
It usually needs about 15- 20 days after receiving the PO.

Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.

Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.

Q: How can I get samples?
A: We are honored to offer you the samples.

Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.

Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.

Q: Does your company accept customization?
A: We accept OEM service.

Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit our company.