| Installation Type: | Wall-Mounted Type |
|---|---|
| Contact: | Contact |
| Output Signal Type: | Analog Type |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Immersion Molten Metal Sampler
Immersion samplers for taking disc samples and pin samples, from heats of molten iron, alloys, or other metal in basic oxygen furnaces, electric furnaces, and open-hearth furnaces.
Material
Paper tube: the length can be 800/900/1000/1200/1500mm or customized
Slag Cap: Steel/Aluminum Sample Size: Round. single layer thickness
For iron: 34*12mm (outer diameter*thickness)
|
Product name |
Immersion Molten Steel Sampler |
|
Paper Tube |
300-1500mm |
|
Probe Diameter |
OD 51mm-OD 38mm |
|
Round Cup |
34*12mm |
|
Sample Time |
4-6s |
|
Temperature Range |
1500-1800ºC |
|
Using Method |
Injection/Immersion |
|
Application |
Steel Sampling to Get Chemical Analysis |
Metallurgical Sensor Probe Immersion Molten Metal Sampler for Steel and Iron Liquid
Warning
If the tube is wet, there is a risk of light projection during immersion. Personal body protection is recommended.
Storage
Conditions: Store the sampler in a dry, covered place.
Using Method
a) Connect the molten iron sampler with suitable immersion lance
b) Iron Sampler should be sunk to the depth of over 350mm at an angle of 60°-65° for 4 to 6s The depth and time should be strictly carried out for its best performance.
c) After taking the sample instrument from the furnace, knock the non-immersed part on the ground, the sample of steel will fall down on the ground. It is best to take a sample when the molten iron temperature is above 1500°C
Q: Are you Factory?
A: Definitely, we are a factory. Welcome to visit us!
Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms.
Q: How can you control your quality?
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.
Q: What is your lead time?
It usually needs about 15- 20 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.
Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honored to offer you the samples.
Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.
Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.
Q: Does your company accept customization?
A: We accept OEM service.
Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit our company.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}