Cangzhou Sefu Ceramic New Materials Co., Ltd.
Add: Guanting Industrial Park, Cangzhou City, Hebei, China
Product Description
Alumina Ceramic Foam Filter
Alumina ceramic foam filters mainly produce aluminum and aluminum alloy purification processes. With increasing requirements for high-quality aluminum products, the application of alumina ceramic foam filters will be more extensive.
Alumina ceramic foam filter application:
- Effectively eliminate the bulk of molten aluminum inclusions.
- Removed small size of several microns inclusions in the normal process of molten aluminum. At the same time, the ceramic foam filter reduces the small inclusions, effectively reduces the number of nucleus in the liquid aluminum, and shortens the solidifying time, and organization refined.
- Reduce the hydrogen content in liquid aluminum. Hydrogen atoms can be adsorbed in oxide inclusions, oxide inclusions can be the core of gas generation. It also filtered gas when removing the inclusion.
- By adsorption, It can remove the harmful elements in molten aluminum (Na K).
Product Parameters
Alumina ceramic foam filter selection
In general, choosing an alumina ceramic foam filter should take into account the requirements of finished product quality, the flow capacity of the molten aluminum tank, the amount of the total filtration of molten aluminum and aluminum liquid cleanliness, and other factors.
The choice of alumina ceramic foam filter is as follows, it is just for customer reference.
Dimension (inch) |
Dimension (mm) |
Pore size (ppi) |
23*23*2 |
584*584*50 |
20/30/40/50 |
20*20*2 |
508*508*50 |
20/30/40/50 |
17*17*2 |
432*432*50 |
20/30/40/50 |
15*15*2 |
381*381*50 |
20/30/40/50 |
12*12*2 |
305*305*50 |
20/30/40/50 |
9*9*2 |
228*228*50 |
20/30/40/50 |
We also can customize alumina ceramic foam filters according to customer specifications.
Alumina ceramic foam filter capacity
Dimensions(inch) |
Dimension(mm) |
Flow Rate(kg Al/min) |
Filter capacity(t Al) |
7' × 7' × 2' |
178 x 178 x 50 |
20-60 |
5 |
9' × 9' × 2' |
228 x 228 x 50 |
40-120 |
10 |
12' × 12' × 2' |
305 x 305 x 50 |
80-240 |
15 |
15' × 15' × 2' |
381 x 381 x 50 |
120-360 |
25 |
17' × 17' × 2' |
431 x 431 x 50 |
160-480 |
35 |
20' × 20' × 2' |
508 x 508 x 50 |
230-490 |
45 |
Filter capacity is derived from 20PPI filters
Alumina ceramic foam filter technical data
Porosity(%) |
80~90% |
Working Temperature |
≤1100°C |
Bending Strength(Mpa) |
0.6 |
Compression Strength(Mpa) |
0.8 |
Thermal Shock Resistance |
1100°C---room temperature 6 times |
Volume Density |
0.35-0.45 g/cm3 |
Alumina ceramic foam filter use
1. Clean the filter box.
2. Gently put the filter into the filter box, and press the gasket around the filter to prevent the molten aluminum from flowing from the side.
3. Even preheat the filter box and filter plates, closer to the temperature of molten aluminum casting.
4. Observe the aluminum liquid hydraulic head change, the normal initial pressure head is 75-150 mm. When the Alumina
liquid began to pass, the pressure head will be reduced to 25 mm below, and then the pressure head will gradually increase.
5. After aluminum filtration, timely remove the filter plate, and clean the filter box.
Sefu Ceramic Plate China Alumina Ceramic Foam Filter for Air Purification & Molten Metal Filtration
Detailed Photos
Specification of Ceramic Foam Filters
Specification(inch) |
Filter Size(mm) |
Remark |
7 inches |
178*178*50 |
10-30ppi continuous casting and rolling of aluminum alloy bars. 30-50ppi semi-continuous casting. 40-50ppi for high-quality aluminum profiles and plates. 50-60ppi for double zero wave continuous casting and rolling |
9 inches |
228*228*50 |
12 inches |
305*305*50 |
15 inches |
381*381*50 |
17 inches |
432*432*50 |
20 inches |
508*508*50 |
23 inches |
584*584*50 |
26 inches |
660*660*50 |
FAQ
Q: Are you Factory?
A: Definitely, we are a factory. Welcome to visit us!
Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms.
Q: How can you control your quality?
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.
Q: What is your lead time?
It usually needs about 15- 20 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.
Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honored to offer you the samples.
Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.
Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.
Q: Does your company accept customization?
A: We accept OEM service.
Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit our company.